STAPLES
1416 Series 22 Gauge Industrial Staples
22 ga · 6–16 mm
Industrial staples for assembly and finishing work. Match the series, crown width and wire cross-section to your stapler before choosing a leg length.
Gauge
22 ga
Length range
6–16 mm
Crown width
10.1 mm
Wire width
0.75 mm
Wire thickness
0.6 mm
Material reference
Zinc-coated wire; grade to confirm
Pieces / strip
100
Availability, material grade, finish and tool compatibility will be checked for the requested configuration and stated in your quotation.
CATALOG REFERENCE DIMENSIONS
Sizes and series
Source-confirmed nominal inch labels are shown where documented. Unverified dimensions remain in the source unit; listed references do not imply every size combination is available.
1416 Series 22 Gauge Industrial Staples · catalog reference sizes
Reference
Length (mm)
1406
6 mm / 1/4 in (nominal)
1408
8 mm / 5/16 in (nominal)
1410
10 mm / 3/8 in (nominal)
1412
12 mm / 15/32 in (nominal)
1414
14 mm / 9/16 in (nominal)
1416
16 mm / 5/8 in (nominal)
Choose a listed size and include it in your enquiry.
DEFINE THE ORDER, NOT JUST THE FASTENER
Packing, samples and order documentation.
Material and packing details
Parameter
Reference
Standard material reference
Zinc-coated wire
Alternative material enquiry
Stainless steel; specify grade
Fasteners per strip
100
Box / carton packing
Specify the required count; quoted for the selected size
Source feed-wire diameter
0.7 mm before forming
Source point angle
40°
Source zinc-layer reference
0.7–1.0 μm
Material and manufacturing figures are catalog references. Coating thickness is not a batch test result or a corrosion-life guarantee; stainless grade, tool fit and packing are confirmed with the selected size.
APPLICATION EXAMPLES
Where it's used
Explore the materials, joints and workshop tasks below. Match the fastener size and tool to your own workpiece before ordering.
Textile-covered interior inserts
Evaluate the 10.1 mm crown along the supported margin of a light textile insert.
Folded decorative-frame corners
Check fine-wire attachment where folded corners change the covering thickness.
Light furniture facing
Match the leg length to the facing build-up and available backing depth.
AI-generated application illustrations, not customer project photographs.
FOUR DIMENSIONS BEFORE A SERIES NUMBER
Read the crown, wire and leg together.
Crown width
Leg length
Wire section
Width × thickness
Measurement guide · schematic, not to scale. Refer to the listed dimensions and an approved order drawing.
1416 Series 22 Gauge Industrial Staples: check the entire cross-section
A familiar series number helps identify a starting point. The crown width, wire width, wire thickness and leg length determine whether a candidate staple matches the tool and joint.
1. Record the crown width and confirm the supplier’s measurement convention on the order drawing.
2. Record both dimensions of the wire cross-section; gauge alone is insufficient.
3. Choose a listed leg length for the material stack and required penetration.
4. Compare the dimensions with the exact stapler model and approve a sample.
Choose for your workpiece and equipment
01
Confirm fine-wire construction
The reference is 22GA with 0.75 × 0.6 mm wire. Treat it as a covering fastener, with the complete geometry checked against the tool.
02
Sample changes in material thickness
Approve both a flat section and the thickest folded area. Inspect seating, loose covering, staple cutting and any point visible on the opposite face.
03
Control the product identity
Keep 1416 and 1450 as separate purchasing items. Similar numeric prefixes do not imply the same wire, crown or suitable application.
Questions before you order
Is 1416 a heavy-duty 14-series staple?
This reference is a 22GA fine-wire staple. Check its 10.1 mm crown and wire dimensions; another manufacturer’s 14-series name may describe a different family.
Can one length handle both flat fabric and folded corners?
It may, but approve both conditions. The material stack and backing depth can justify separate lengths.
Application limits to check
- Do not interchange this family with 17GA 1450 staples.
- Do not specify it for cabinet carcass strength or structural roof attachment.
