STAPLES
1416 Series 22 Gauge Industrial Staples
Catalog product reference. See the dimensions below to identify this series.
22 ga · 6–16 mm
Industrial staples for assembly and finishing work. Match the series, crown width and wire cross-section to your stapler before choosing a leg length.
Crown width
10.1 mm / 0.40 in (nominal)
wire width
0.75 mm / 0.030 in (nominal)
wire thickness
0.6 mm / 0.024 in (nominal)
Gauge
22 ga
Length range
6–16 mm
Material reference
Zinc-coated wire; grade to confirm
Pieces / strip
100
Availability, material grade, finish and tool compatibility will be checked for the requested configuration and stated in your quotation.
APPLICATION EXAMPLES
Where it's used
Explore the materials, joints and workshop tasks below. Match the fastener size and tool to your own workpiece before ordering.
Textile-covered interior inserts
Evaluate the 10.1 mm crown along the supported margin of a light textile insert.
Folded decorative-frame corners
Check fine-wire attachment where folded corners change the covering thickness.
Light furniture facing
Match the leg length to the facing build-up and available backing depth.
AI-generated application illustrations, not customer project photographs.
CATALOG REFERENCE DIMENSIONS
Sizes and series
Source-confirmed nominal inch labels are shown where documented. Unverified dimensions remain in the source unit; listed references do not imply every size combination is available.
1416 Series 22 Gauge Industrial Staples · catalog reference sizes
Reference
Length (mm)
1406
6 mm / 1/4 in (nominal)
1408
8 mm / 5/16 in (nominal)
1410
10 mm / 3/8 in (nominal)
1412
12 mm / 15/32 in (nominal)
1414
14 mm / 9/16 in (nominal)
1416
16 mm / 5/8 in (nominal)
On smaller screens, swipe the table to see every column. Confirm the final drawing, tolerances and packaging before ordering.
FOUR DIMENSIONS BEFORE A SERIES NUMBER
Read the crown, wire and leg together.
Crown width
Leg length
Wire section
Width × thickness
Measurement guide · schematic, not to scale. Refer to the listed dimensions and an approved order drawing.
1416 Series 22 Gauge Industrial Staples: check the entire cross-section
A familiar series number helps identify a starting point. The crown width, wire width, wire thickness and leg length determine whether a candidate staple matches the tool and joint.
1. Record the crown width and confirm the supplier’s measurement convention on the order drawing.
2. Record both dimensions of the wire cross-section; gauge alone is insufficient.
3. Choose a listed leg length for the material stack and required penetration.
4. Compare the dimensions with the exact stapler model and approve a sample.
Choose for your workpiece and equipment
01
Confirm fine-wire construction
The reference is 22GA with 0.75 × 0.6 mm wire. Treat it as a covering fastener, with the complete geometry checked against the tool.
02
Sample changes in material thickness
Approve both a flat section and the thickest folded area. Inspect seating, loose covering, staple cutting and any point visible on the opposite face.
03
Control the product identity
Keep 1416 and 1450 as separate purchasing items. Similar numeric prefixes do not imply the same wire, crown or suitable application.
DEFINE THE ORDER, NOT JUST THE FASTENER
Packing, samples and order documentation.
Quantity & packing unit
State your quantity in pieces, strips, reels, boxes or cartons. Confirm the conversion between inner packs and shipping cartons.
Samples & minimum order
Send the selected specification and trial quantity. Sample availability, minimum order and lead time will be checked for the requested configuration.
Labels & documentation
Discuss custom packing, private labels and required drawings or documents before order approval. Keep an agreed sample, label and specification reference for repeat orders.
Questions before you order
Is 1416 a heavy-duty 14-series staple?
This reference is a 22GA fine-wire staple. Check its 10.1 mm crown and wire dimensions; another manufacturer’s 14-series name may describe a different family.
Can one length handle both flat fabric and folded corners?
It may, but approve both conditions. The material stack and backing depth can justify separate lengths.
Application limits to check
- Do not interchange this family with 17GA 1450 staples.
- Do not specify it for cabinet carcass strength or structural roof attachment.
